- Feed Meal & Commodities Product
- Corn Gluten Meal (CGM)
- L-Lysine HCL 98.5%( Feed Grade)
- L-Lysine Sulphate 70%( Feed Grade)
- L-Threonine
- Yellow Maize
- Wheat
- Meat Bone Meal Animal Feed
- Rapeseed Meal
- Leaf Meal Pellet
- Poultry Meal
- Feather Meal
- Sodium Bicarbonate
- Mono - Dicalcium Phosphate (MDCP)
- DICALCIUM PHOSPHATE (DCP)
- Corn Gluten Feed
- Mono Calcium Phosphate (MCP) 22% Granular Feed Grade
- Pet Food
- Wire & Accessories
Gsion Resources (M) Sdn Bhd
3694, Jalan Ooi Kar Seng,
Taman Nibong Tebal,
14300 Nibong Tebal, S.P.S.,
Penang, Malaysia.
+604-593 5913
+604-593 4015
1.5KV Fiberglass Sleeving Coated Silicone Resin
Model Number£ºSB-SGS-15
Working temperature: 200ºC
Structure
The material content of the SB-SGS-15 is Non-Alkali Fiberglass Braided then coated with silicone resin and treated in high temperature.
Usage
SB-SGS-15 sleeving with its good dielectric strength, flexibility and flame retarding properties make it high performance qualities. It can be widely used in insulated or partially insulated conductors, bus bars, component leads, or assemblies of electrical components etc.
Specification
Dimension
| Item | Performance | Note | |
|
Dielectric breakdown
Voltage KV AC
|
Minimum average | ≥1.5 | Before aged |
| Minimum single point | ≥1.0 |
6 HRS* 245±5ºC
245±5ºC 6HRS AGING
|
|
| Minimum average | ≥1.0 | ||
| Minimum single point | ≥0.7 |
6 HRS* 245±5ºC
245±5ºC 6HRS AGING
|
|
| Thermal endurance | No indication of crack | OK | |
| Fire resistance | VW-1 | OK | UL 1441 |
Dimension
| Inside Diameter |
Wall thickness minimum
(mm)
|
Standard package
m/roll
|
|
| Nominal(mm) | Tolerance(mm) | ||
| φ0.5 | +0.2, -0.1 | ≥0.30 | 200 |
| φ1.0 | +0.2, -0.1 | ≥0.30 | 200 |
| φ1.5 | +0.2, -0.1 | ≥0.30 | 200 |
| φ2.0 | +0.2, -0.1 | ≥0.30 | 200 |
| φ2.5 | +0.3, -0.1 | ≥0.35 | 200 |
| φ3.0 | +0.3, -0.1 | ≥0.35 | 200 |
| φ4.0 | +0.3, -0.1 | ≥0.35 | 200 |
| φ4.5 | +0.3, -0.1 | ≥0.40 | 100 |
| φ5.0 | +0.3, -0.1 | ≥0.40 | 100 |
| φ6.0 | +0.3, -0.1 | ≥0.40 | 100 |
| φ7.0 | +0.3, -0.1 | ≥0.45 | 100 |
| φ8.0 | +0.3, -0.1 | ≥0.45 | 100 |
| φ9.0 | +0.3, -0.1 | ≥0.55 | 100 |
| φ10.0 | +0.3, -0.1 | ≥0.55 | 100 |
| φ12.0 | +1.0, -1.0 | ≥0.55 | 50 |
| φ14.0 | +1.0, -1.0 | ≥0.55 | 50 |
| φ16.0 | +1.0, -1.0 | ≥0.55 | 50 |
| φ18.0 | +1.0, -1.0 | ≥0.55 | 50 |
| φ20.0 | +1.0, -1.0 | ≥0.65 | 25 |
| φ25.0 | +1.0, -1.0 | ≥0.65 | 25 |
| φ30.0 | +1.0, -1.0 | ≥0.65 | 25 |